Indian Journal of Dental ResearchIndian Journal of Dental ResearchIndian Journal of Dental Research
HOME | ABOUT US | EDITORIAL BOARD | AHEAD OF PRINT | CURRENT ISSUE | ARCHIVES | INSTRUCTIONS | SUBSCRIBE | ADVERTISE | CONTACT
Indian Journal of Dental Research   Login   |  Users online: 1043

Home Bookmark this page Print this page Email this page Small font sizeDefault font size Increase font size         

    Article Cited by others

ORIGINAL RESEARCH

Evaluation of marginal gap of Ni-Cr copings made with conventional and accelerated casting techniques

Tannamala Pavan Kumar, Azhagarasan Nagarasampatti Sivaprakasam, Shankar K Chitra

Year : 2013| Volume: 24| Issue : 1 | Page no: 147-148

   This article has been cited by
 
1 Comparación de la precisión marginal de cofias de zirconia entre los sistemas CAD/CAM Cerec InLab (Sirona®), CAD/CAM Zirkonzahn (Zirkonzahn®) y sistema pantográfico Zirkograph 025 ECO (Zirkonzahn®)
María José Jiménez Suárez,Fernando Sandoval Vernimmen,Estefanía Alexandra Rodríguez Merchán
Revista Odontológica Mexicana. 2015; 19(4): 240
[Pubmed]  [Google Scholar] [DOI]
2 Comparación de la precisión marginal de cofias de zirconia entre los sistemas CAD/CAM Cerec InLab (Sirona®), CAD/CAM Zirkonzahn (Zirkonzahn®) y sistema pantográfico Zirkograph 025 ECO (Zirkonzahn®)
María José Jiménez Suárez,Fernando Sandoval Vernimmen,Estefanía Alexandra Rodríguez Merchán
Revista Odontológica Mexicana. 2015; 19(4): 240
[Pubmed]  [Google Scholar] [DOI]
3 Comparison of marginal fit of zirconia copings manufactured with the use of two CAD/CAM systems Cerec InLab (Sirona®) CAD/CAM Zirkonzahn (Zirkonzahn®) and Zirkograph 025 ECO pantographic system (manual milling system) (Zirkonzahn®)
María José Jiménez Suárez,Fernando Sandoval Vernimmen,Estefanía Alexandra Rodríguez Merchán
Revista Odontológica Mexicana. 2015; 19(4): e236
[Pubmed]  [Google Scholar] [DOI]
4 Comparison of marginal fit of zirconia copings manufactured with the use of two CAD/CAM systems Cerec InLab (Sirona®) CAD/CAM Zirkonzahn (Zirkonzahn®) and Zirkograph 025 ECO pantographic system (manual milling system) (Zirkonzahn®)
María José Jiménez Suárez,Fernando Sandoval Vernimmen,Estefanía Alexandra Rodríguez Merchán
Revista Odontológica Mexicana. 2015; 19(4): e236
[Pubmed]  [Google Scholar] [DOI]
5 evaluation of marginal gap of ni-cr copings made with conventional and accelerated casting techniques
tannamala, p.k. and azhagarasan, n.s. and shankar, k.c.
indian journal of dental research. 2013; 24(1): 147-148
[Pubmed]  [Google Scholar]

 

Read this article