Indian Journal of Dental ResearchIndian Journal of Dental ResearchIndian Journal of Dental Research
HOME | ABOUT US | EDITORIAL BOARD | AHEAD OF PRINT | CURRENT ISSUE | ARCHIVES | INSTRUCTIONS | SUBSCRIBE | ADVERTISE | CONTACT
Indian Journal of Dental Research   Login   |  Users online: 3011

Home Bookmark this page Print this page Email this page Small font sizeDefault font size Increase font size         

 


 
Table of Contents   
SYSTEMATIC REVIEW  
Year : 2016  |  Volume : 27  |  Issue : 1  |  Page : 91-99
Dental unit water lines decontamination with the aid of nanotechnology


Department of Periodontology, Krishnadevaraya College of Dental Sciences, Bengaluru, Karnataka, India

Click here for correspondence address and email

Date of Submission26-Jan-2015
Date of Decision21-Feb-2015
Date of Acceptance15-Mar-2016
Date of Web Publication7-Apr-2016
 

   Abstract 

Aim: This article reviews the issue of dental unit waterline (DUWL) contamination which affects all the clinical and hospital settings. The contaminating microorganisms commonly isolated from these settings and the most pathogenic among them have serious consequences. Over the years several measures are inculcated for decontamination of water, their advantages and shortcomings have been addressed. Options using nanotechnology which are available in the market are described briefly.
Materials and Methods: A manual and electronic search was conducted. Google and PubMed were searched for relevant material from studies up to 2013. Medical Subject Headings words looked for were "Nanotechnology," "Water purification," and "Biofilms." Reviewed findings were summarized by topic, using the Preferred Reporting Items for Systematic Reviews and Meta-analyses statement for reporting. Seventy articles were shortlisted for articles pertaining to our topic of discussion. A systematic approach was followed by two independent reviewers and included eligibility criteria for study inclusion, data extraction, data synthesis, and drawing of conclusion.
Results: Dental waterline contamination is widespread in any type of dental setting having serious implications on clinicians and patients alike, especially elderly and immune-compromised. Hence, international bodies like center for disease and control and American Dental Association have come up with stringent measures for maintenance of water quality. A gamut of procedures has been tried to overcome this problem ranging from chlorinated products, water filters to the usage of distilled water. The use of nanoemulsions, nanofilters, nanomembranes, etc., and their applicability for routine usage is discussed.
Conclusions: Biofilm formation in DUWLs is inevitable with the subsequent release of part of microbiota into the otherwise sterile dental settings. These consequences can be quite serious on clinicians and dental patients. Though conventional measures in water decontamination have been partly successful, the quest for more foolproof methods has led to the use of latest technology, i.e., nanotechnology. The most practical option has to be chosen based on the ease of their usage.

Keywords: Bacteria, biofilms, dental unit waterlines, medically compromised patients, nanotechnology, water purification

How to cite this article:
Paramashivaiah R, Prabhuji M, Narayanan R. Dental unit water lines decontamination with the aid of nanotechnology. Indian J Dent Res 2016;27:91-9

How to cite this URL:
Paramashivaiah R, Prabhuji M, Narayanan R. Dental unit water lines decontamination with the aid of nanotechnology. Indian J Dent Res [serial online] 2016 [cited 2019 Oct 23];27:91-9. Available from: http://www.ijdr.in/text.asp?2016/27/1/91/179838
Approximately, 1.8 million deaths and 61.9 million disability-adjusted life years worldwide are attributable to unsafe water, sanitation, and poor hygiene according to the World Health Organization. [1]

It is established that there indeed are microorganisms residing in most of our waterlines as biofilms, with a complex architecture, making most elimination techniques impenetrable. The various measures include the point of use filters, use of sterile water system, chemical treatment of water, etc. Each of them is fraught with their own set of advantages and disadvantages. The progress of material science has ascended from macro to micro and even nano levels.


   Materials and methods Top


A detailed MEDLINE search was conducted, and the articles pertaining to our topic were included. Only articles printed in the English language were considered. Articles pertaining to nanotechnology and its usages in water purification, methods and its applications in the treatment of dental unit waterlines (DUWLs) were included. The MEDLINE database was searched from 1987 till 2013 using the following Medical Subject Headings: "Nanotechnology," "Water purification," "Biofilms," and "DUWLs." A total of 94 articles were chosen addressing nanotechnology, nanoparticles, and water purification. Based on the study titles and abstracts, 70 literature pieces were finally selected and shortlisted, such that they fulfilled the inclusion criteria. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) was used to describe and summarize the results of our review, and the 27 PRISMA were used [Figure 1]. [2]
Figure 1: Diagrammatic representation of the selection of studies

Click here to view


Inclusion criteria

  • Studies that were published in authentic international and national journals
  • Studies which were either of a randomized controlled clinical trial type or of a peer-reviewed category articles
  • Studies which clearly stated objectives of their research and/or hypothesis to be tested.
Exclusion criteria

Studies which did not meet the required inclusion criteria or did not clearly relay the information were excluded.

Data collection and analysis

Initially, titles and abstracts of the selected studies identified by the previously described search strategies were screened independently by two reviewers so as to determine whether they should be included in the review. Selected studies were independently reviewed by the reviewers using the criteria defined above.

The literature review resulted in the following data, which has been put together and presented systematically.


   Dental unit waterline microstructures Top


Biofilm

The microorganisms may originate in the waterline from any source, namely suck-back from patients mouth or those inherently present in the water form a biofilm adherent to the inner part of tubing that supplies the operatory. [3] There are basically five steps in the biofilm development:

  • Stage 1: Initial attachment
  • Stage 2: Irreversible attachment
  • Stage 3: Maturation I
  • Stage 4: Maturation II
  • Stage 5: Dispersion.
Clinical significance

Till recently it was inconceivable that DUWL contamination can lead to actual fatality although two such reports have been quoted in older literature without adequate substantiation. [4],[5] The complacency upon this matter is warranted no more, due to the alarming case of death of an 82-year-old Italian lady. This woman died due to complications of Legionnaire's disease - A fatal type of pneumonia caused by Legionella bacteria which in the present case was specifically acquired during dental treatment. [6] While dealing with medically compromised patients, utmost care needs to be taken to prevent secondary infections. The commonly isolated species found in DUWLs are Gram-negative bacteria. These lead to the production of endotoxins, which have been shown to trigger or exacerbate asthma in susceptible individuals. This is evidenced by the study done on dental students who developed asthma on commencement of their dental training. They also suggested a temporal association between occupational exposure to contaminated DUWL with aerobic counts of >200 cfu/mL at 37°C. [7]

Organisms identified

An array of microbes has been isolated from the biofilms in the DUWL. Among all microorganisms isolated from DUWL, the ones having a pathogenic potential are Legionella pneumophila, Mycobacterium spp., Pseudomonas aeruginosa, Acinetobacter baumannii, Staphylococcus spp., and Stenotrophomonas maltophilia. [3],[8] The prevalence of legionellae species in DUWL has been reported to vary between 0% and 68%. [9] Most of the isolated organisms are Gram-negative mesoheterotrophic water bacteria.

A detailed, quantitative, and qualitative analysis of water and biofilm from DUWL indicates that yeast-like fungi such as the Candida albicans, Candida curvata are found in the samples. Other species isolated from dental water units undergoing a continuous waterline treatment were Aspergillus flavus, Penicillium expansum, Exophiala mesophila. [8],[10] Some of these fungi are also causative organisms of respiratory infections in immunocompromised patients [Table 1]. [11]
Table 1: List of isolated organisms


Click here to view


The reports of the emergence of new multiple-drug resistant organisms (MDRO) found in nonclinical environments and the spread of these pathogens in the clinical setting have all accentuated the need to monitor these organisms. [8] Most of the MDROs are Gram-negative microorganisms having serious consequences due to their strong antimicrobial resistance. Among them, P. aeruginosa is one such organism causing serious respiratory infections in patients. P. aeruginosa has been reported to survive for months on dry surfaces, [12] and its ability to persist and grow even in antimicrobial solutions like triclosan, makes it a disquieting concern for medical staff. [13]

S. maltophilia is a globally emerging Gram-negative MDRO that is commonly recovered from water treatment and distribution systems, wastewater plants, sinkholes, lakes, rivers, faucets, tap water, bottled water, contaminated chlorhexidine-cetrimide topical antiseptic, hand-washing soap, contact lens solutions, ice machines, and sink drains. The point of significance with respect to S. maltophilia is its ability to adhere to plastics and materials used in intravenous cannulae, prosthetic devices, DUWLs, and nebulizers.

Conventional measures against dental unit waterline contamination

Some of the water treatment methods in usage are biocidal agents such as chlorine and its derivatives, use of ultraviolet light, [14] boiling of water, ultrasonic irradiation at a low frequency, [15] water distillation, reverse osmosis, filtration with fiber and ceramic filters, activated carbon, solid block, pitcher and faucet-mount filters, bottled water, ion exchange, water softener, ozone systems, and activated alumina "Altered" Water. Among these, the commonly used treatments are analyzed below.

Filtration

The purpose of using filters on the dental waterline is to eliminate bacteria from the water entering the hand-piece. Filters should be inserted just distal to the point of entry of water into the hand-piece for maximum efficiency. A pore size of 0.2 μ is recommended. Though filters eliminate bacteria, their effect on the biofilm in the prefiltration segments of waterlines is nil unless concomitant treatment to remove them is included. [16]

Flushing

American Dental Association recommends that waterlines should be flushed thoroughly for several minutes at the start of each clinical day. Flushing for 20 min, which would be impractical prior to most dental surgeries, would reduce the bacterial count to zero. However, the persistent nature of contamination is demonstrated when 30 min later, shedding of bacteria from the biofilm returns the total colony counts to within preflush range. Flushing for several seconds between patients, however, may remove materials that may have entered the water system during patient treatment. [17]

Biocides and chemical disinfectants

Biocides have been used in an attempt to remove the biofilm and eliminate planktonic bacteria. These include chlorhexidine gluconate, povidone iodine, ethanol, hypochlorite, peroxide, and glutaraldehyde. The intrinsic resistance of the biofilm ecosystem has hampered their value. [18] For usage of disinfectants, there is a dilemma between effective disinfection and formation of harmful disinfection by-products (DBP). [19]

Nanotechnology

Nanotechnology, the purposeful machination of matter to a particle size in the range of <100 nm, holds a definite scope for creating newer materials and devices which utilize the unique phenomena realized at those length scales. This is because of their high reactivity due to the large surface to volume ratio. [20]

Materials which can be denoted as nanomaterials are smaller than 100 nm, in at least one dimension. When diminished to this level, these materials exhibit unique size-dependent properties which vary from their larger counterparts, many of which have been explored for applications in water and wastewater treatment. The smoothly scalable size-dependent properties which have been exploited are the properties of nanomaterials which relate to the high specific surface area, such as fast dissolution, high reactivity, and strong sorption. The discontinuous properties, such as superparamagnetism, localized surface plasmon resonance, and quantum confinement effect. [21]

Synthesis of nanoparticles

Fabrication of nanomaterials is done using different techniques. Nanoparticles can be produced from larger structures (top down) by the use of ultrafine grinders, lasers, and vaporization followed by cooling. As the particles become more complex, there is a preference to use bottom-up approach by arranging molecules to form complex structures with new and useful properties.

  • Self-assembly: Manipulation of physical and chemical conditions such as pH, temperature, and solute concentrations can induce self-assembly of molecules to form fibrous nanostructures [22]
  • Layer by layer deposition: By layering of sodium silicate and poly (allylamine hydrochloride) on gold, followed by calcination in a furnace, platforms of bilayer membranes used for protein analysis can be fabricated [23]
  • Preparation of functional nanoparticles by thermal plasmas: Induction of thermal plasmas help in the formulation of functional nanoparticles of silicide and boride. Injected powders are evaporated and reacted with boron in thermal plasma [24]
  • Gas phase synthesis and sol-gel processing: Gas phase synthesis and sol-gel processing are the major sections into which most attempts for the synthesis of nanoparticles fall under. Nanoparticles with diameters ranging from 1 to 10 nm with consistent crystal structure, surface derivatization, and high degree of monodispersity have been processed by both gas-phase and sol-gel techniques [25],[26]
  • Crystallization: Utilizing solutions with differing amounts of amino acids, hydroxyapatite-aspartic acid crystals were created [27]
  • Biogenic strategy: The self-assembled organic materials which form templates or scaffolding for inorganic components are examples of sub-levels in structural hierarchy with its complex biologic set up [28]
  • Microbial synthesis: Even fungus Aspergillus fumigatus can be used for the production of silver nanoparticles which is carried out extracellularly [29]
  • Biomass reactions: Gold nanorods and nanoparticles with other shapes were produced by incubation of dead oat stalks with an acidic aqueous solution of gold ions [30]
  • Alternative preparation methods: To produce wider range of grain sizes, precipitation with controlled mixing and monitoring of nucleation could be used. Other methods are filter dye applications in photographic films and spectral sensitizing dyes for use in silver halide grains [31]
  • Other strategies: Additional nanoparticle synthesis techniques include sonochemical processing and high energy ball milling. [32]

   Applications of nanotechnology in dentistry Top


Nanotechnology has vastly been used in the field of dentistry over the past couple decades, and the applications are only increasing. Nanodental techniques may evolve through several stages of technological development, first using genetic engineering, tissue engineering, and tissue regeneration, and later growing whole new teeth in vitro and installing them. Ultimately, the nanorobotic manufacture and installation of a biologically autologous whole replacement tooth including both mineral and cellular components find the usage of nanotechnology.

The applications are enumerated: [33],[34],[35]

  • Tooth denaturation and caries prevention (remineralization)
  • Enhancing dental durability and cosmetics (nanoporous silica filled composite)
  • Diagnosis and treatment of oral cancer (nanoelectromechanical systems, optical nanobiosensor are used for diagnosis, while systems like brachytherapy with nanomaterials, drug delivery across the blood-brain barrier, and nanotechnology in photodynamic therapy are utilized for treatment of oral cancers)
  • Orthodontic nanorobots
  • Nano adhesive (Polyhedral Oligomeric Silse Squiox - They can be used as either additives or replacements for traditional plastics) [36]
  • Nano cream
  • Nano impression (Nanofillers integrated in the vinylpolysiloxanes, produce a unique addition siloxane impression material. The material gives an advantage of better flow, improved hydrophilic properties, fewer voids and in turn, enhanced detail precision)
  • Hypersensitivity Cure (nanosized particles in the desensitizing toothpaste; reconstructive dental nanorobots selectively and precisely occlude selected tubules in a small time frame, using native biological materials)
  • Nano Anesthesia (colloidal suspension containing millions of active analgesic dental nanorobot "particles" may be released on the patient's gingivae. These travel through the gingival sulcus and the dentinal tubules to reach the pulp. Once installed in the pulp, the analgesic dental nanorobots may be commanded by the dentist to shut down all sensitivity in any tooth that requires treatment)
  • Nanofiber scaffolds


    • Nanofibers, <100 nm in diameter, including nanorods, nanoplatelets, nanotubes, nanofibrils, and quantum wires are other major nanomaterials being widely explored for various applications and with more fervor in the field of periodontology
    • Periodontal regeneration can be achieved by best mimicking the structure of the extracellular matrix and allowing adhesion and proliferation of the cells at the defect site. Development of electrospun fibers and arrangement of the same in the form of scaffolds are moving a step closer toward the ideal properties of the guided tissue regeneration membranes. The nano-sized bone graft materials and drug delivery systems are proving to achieve higher regeneration than the systems available at present
  • Nano-Bio Chip Technology (used as a detector for the various markers in the saliva and gingival crevicular fluid)
  • Nanofiltration (for water purification).
Nanotechnology for water decontamination

The ever increasing dearth of potable water has almost reached a crisis which could be abated utilizing advancements in nanoscience and engineering. The tools are nanoabsorbents, nanocatalysts, bioactive nanoparticles, nanostructured catalytic membranes, submicron nanopowder, nanotubes, magnetic nanoparticles, granules, flake, and high area metal particle supramolecular assemblies with characteristic length scales of 9-10 nm including clusters, micromolecules, nanoparticles, and colloids having a significant impact on water quality in the natural environment. [37] Carbon nanotubes (CNTs) have attracted a lot of attention as very powerful adsorbents, for a wide variety of organic compounds from water. Examples include dioxin, [38] polynuclear aromatic hydrocarbons, [39],[40],[41] dichlorodiphenyltrichloroethane and its metabolites, [42] polybrominated diphenyl eithers, [43] chlorobenzenes and chlorophenols, [44],[45] trihalomethanes, [46],[47] bisphenol A, nonylphenol, [48] phthalate esters, [49] dyes, [50] etc.

Among the plethora of materials, four categories could be evaluated for water purification: (1) Carbonaceous nanomaterials, (2) metal-containing nanoparticles, (3) zeolites, and (4) dendrimers. Their versatile physicochemical properties make them particularly attractive as separation and reactive media for water purification. [24]

Carbon-based nano-adsorbents

CNTs eliminate organic chemicals more efficiency than activated carbon on adsorption. [51] Oxidized CNTs have high adsorption capacity for metal ions with fast kinetics. Electrostatic attraction and chemical bonding on the surface of functional groups (e.g., carboxyl, hydroxyl, and phenol) of CNTs assist in adsorption of metal ions. [52]

Metal-based nano-adsorbents

Cost effectiveness is a major factor for metal oxides such as iron oxide, titanium dioxide, and alumina for removal of metals and radionuclides. [53] Metal-based nanomaterials have been explored to remove a variety of heavy metals such as arsenic, lead, mercury, copper, cadmium, chromium, nickel, and have shown great potential to outcompete activated carbon. [54]

Polymeric nano-adsorbents

Dendrimers are tailored adsorbents that are capable removing both organics and heavy metals. Their interior shells can be hydrophobic for sorption of organic compounds, while the exterior branches can be tailored for adsorption of heavy metals [Figure 2]. [55]
Figure 2: Important milestones in the history of water purification (1800-2007) from the perspective of Noble metal nanoparticles in water treatment (compiled from multiple sources in World Wide Web)

Click here to view



   Individual techniques Top


Pollution detection and sensing

Sensors for the detection of different compounds can be fabricated from nanostructured materials. [56] An example is silver nanoparticle array membranes that can be used as flow-through Raman scattering sensors for water quality monitoring. [57] The particular properties of CNTs make them very attractive for fabrication of nanoscale chemical sensors, especially for electrochemical sensors. [58],[59],[60],[61]

Nanofiltration

Water treatment for drinking water production using nanofiltration membranes is one of the easier techniques. [62] These are pressure-driven membranes with properties intermediate between those of reverse osmosis and ultrafiltration membranes and possess pore sizes between 0.2 and 4 nm. Nanofilter (NF) membranes have been shown to remove turbidity, microorganisms, and inorganic ions such as Ca ++ and Na + . CNTs have been arranged to form hollow monolithic cylindrical membranes, [63] which were found to be efficient for removal of bacteria or hydrocarbons. Silver nanoparticles have been assessed for drinking-water treatment due to their strong and broad spectrum of antimicrobial activities. [64],[65],[66] Silver nanofilters have varieties, among which the highest bacteria removal efficiency was by the Ag/cation resin filter. These filters completely removed all targeted bacteria, namely Escherichia coli, Salmonella typhimurium, Shigella dysenteriae, and Vibrio cholera. [67]

Below is a schematic of a composite nanomaterial packed bed reactor for purification of water contaminated by mixtures of (i) metal ions, (ii) organic solutes, and (iii) bacteria [Figure 3]. [68]
Figure 3: Nanomaterial packed bed reactor for purification of water

Click here to view


Adsorbents

Slurry reactors or adsorbers have included nano-adsorbents into their existing treatment procedures. These are most efficient in powder form since all surfaces of the adsorbents are utilized, and the mixing greatly facilitates the mass transfer. Nano-adsorbents can also be used in fixed or fluidized adsorbers in the form of pellets/beads or porous granules loaded with nano-adsorbents. [69]

Contemporary innovations in nanotechnology for water decontamination

Nanoemulsions

Nanoemulsions are unique disinfectants with a uniform population of droplets of high energy ranging in diameter from 100 nm to 300 nm. [70] These nanoemulsions have expanded biocidal activity even against enveloped viruses, spores, and fungi, along with bacteria by disruption of their outer membranes. [71] A study to investigate the efficacy of cetylpyridinium chloride containing nanoemulsion disinfectants on bacterial loads at different time intervals was undertaken. [72] The modus operandi is nonspecific disruption of bacterial cell membranes, which does not necessarily result in the development of resistant strains. Nanoemulsions can be diluted and stored at a broad range of temperatures for up to 2 years. [73],[74],[75] The present study the majority of microbes found were Gram-negative water bacteria common in dental waterlines. The significant reduction in live bacteria observed in nanoemulsion-treated DUWL tubing showed that nanoemulsion effectively reduced DUWL communities.

Mechanism of action

The kinetics of the nanoemulsion is attributed to their production, wherein nanoemulsions are under produced under high shear forces in a microfluidizer. The shear energy is stored in oil droplets, giving them the high energy. This energy is passed on to bacteria upon fusion of the droplet with the bacteria, disrupting the bacterial membrane. Adjuncts used in a nanoemulsion are cetylpyridinium chloride and quaternary ammonium salt. The positive charge is placed on the nanodroplet by cetylpyridinium chloride, by its incorporation as a co-surfactant to the nanodroplet. There are multiple modes of action for antimicrobial activity of cetylpyridinium, namely disruption of intermolecular interactions, cellular membrane, cellular permeability controls, and inducing leakage of cellular contents. It could be concluded that nanoemulsion containing cetylpyridinium chloride could be quite effective in DUWL decontamination. [72]


   Nanotechnology for Decontamination: The Highpoints, Pitfalls Top


In spite of all the accomplishments of nanotechnology, there is still a wide debate about the safety of nanoparticles and their potential impact on environment and biota [Figure 4]. [76],[77]
Figure 4: Pros and cons of usage of nanoparticles

Click here to view


Advantages of using nanotechnology for water purification

  • Water decontamination is effective even at low concentrations
  • The overall bulk form of nanomaterials needed for treatment are less, hence waste generated posttreatment is minimal
  • Nanoparticles have higher surface energy thereby novel reactions can be accomplished at a nanoscale, which is impossible with the analogous bulky material
  • Innumerable factors have been attributed to the chemical reactivity enhancement of nanoparticles: Small particle size leading to increase in specific surface area, increase in the surface energies for easier delocalization of electrons, and perfection in atomic organization in the lattice [78]
  • Nanomaterials do not have a strong antioxidant property like conventional disinfectants, hence they do not produce DBPs. [19]
Disadvantages of using nanotechnology for water treatment

Ecotoxicity in water has risen due to engineered nanoparticles production. This can be rectified by the use of model wastewater treatment, by clearing sludge for removal of oxide nanoparticles. TiO 2 nanoparticles aggregate severely when added to water. Aqueous fullerene particles can get coagulated in the presence of salt, so on and so forth. [79]

Nanotechnology-based water treatment technologies would be able to compete with conventional treatments only if the cost and systems utilizing nanomaterials become comparable to conventional methods. One of the myths people carry about future nanotechnology is that it is the panacea for all ailments.


   Conclusion Top


Nanotechnology though relatively recent has gradually encaptured every area of medical and dental science. As in any of the technological advancements, the economy, human and environmental issues are barricade for the widespread application in the immediate future. The traditional methods of water decontamination do not actually cater to every type of dental setup. The usage of chlorine-containing disinfectants is more feasible in everyday practice, although the pollution to the clinicians and the dental assistants is alarming when quarantined. Even though ultrafilters are used, there are only a scattering if studies to support their efficacy. The custom made distilled water tanks are quite cumbersome for the wide-spread usage.

The specific sections of nanotechnology water treatment which could be incorporated fully are nanoabsorbents, nanotechnology-enabled membranes, and nanophotocatalysts. The compelling reasons for their utility are their advanced stage in research and development, availability and feasibility, and lastly compatibility with inherent systems. Aerosol contamination from the inherent water supply will definitely point toward the inadequacies in the decontamination techniques, thereby accentuating the need for incorporation of innovative technological advancements in the form of nanotechnology in the area of screening and assessment of water quality, and counteracting the same at nano levels in the form of nanoemulsions and filters.

More and more mutant and virulent species of microorganisms which evade even the multiple levels of infection control are evolving. Since, water usage is ubiquitous and water being the primary vehicle of transport of these organisms, provision of pristine water in all the clinical areas is indispensable.

Currently, though nanotechnology-based water decontamination is in its embryo stages, the days are not far, when it could become the routine tenets of disinfection due to its comprehensive benefits.

Financial support and sponsorship

Nil.

Conflicts of interest

There are no conflicts of interest.

 
   References Top

1.
World Health Organization (WHO). Water, sanitation and hygiene links to health. Geneva, Switzerland: WHO; 2004.  Back to cited text no. 1
    
2.
Moher D, Liberati A, Tetzlaff J, Altman DG; PRISMA Group. Preferred reporting items for systematic reviews and meta-analyses: The PRISMA statement. Ann Intern Med 2009;151:264-9, W64.  Back to cited text no. 2
[PUBMED]    
3.
Britto RP, Muralidharan NP. Contamination of dental waterline and its control measures. Asian J Pharm Clin Res 2013;6:19-23.  Back to cited text no. 3
    
4.
Martin MV. The significance of the bacterial contamination of dental unit water systems. Br Dent J 1987;163:152-4.  Back to cited text no. 4
[PUBMED]    
5.
Atlas RM, Williams JF, Huntington MK. Legionella contamination of dental-unit waters. Appl Environ Microbiol 1995;61:1208-13.  Back to cited text no. 5
    
6.
Ricci ML, Fontana S, Pinci F, Fiumana E, Pedna MF, Farolfi P, et al. Pneumonia associated with a dental unit waterline. Lancet 2012;379:684.  Back to cited text no. 6
    
7.
Porteous NB, Grooters AM, Redding SW, Thompson EH, Rinaldi MG, De Hoog GS, et al. Identification of Exophiala mesophila isolated from treated dental unit waterlines. J Clin Microbiol 2003;41:3885-9.  Back to cited text no. 7
    
8.
Brooke JS. Stenotrophomonas maltophilia: An emerging global opportunistic pathogen. Clin Microbiol Rev 2012;25:2-41.  Back to cited text no. 8
    
9.
Pankhurst CL, Coulter WA. Do contaminated dental unit waterlines pose a risk of infection? J Dent 2007;35:712-20.  Back to cited text no. 9
    
10.
Porteous NB, Redding SW, Thompson EH, Grooters AM, De Hoog S, Sutton DA. Isolation of an unusual fungus in treated dental unit waterlines. J Am Dent Assoc 2003;134:853-8.  Back to cited text no. 10
    
11.
Szymanska J, Sitkowska J, Dutkiewicz J. Microbial contamination of dental unit waterlines. Ann Agric Environ Med 2008;15:173-9.  Back to cited text no. 11
    
12.
Kramer A, Schwebke I, Kampf G. How long do nosocomial pathogens persist on inanimate surfaces? A systematic review. BMC Infect Dis 2006;6:130.  Back to cited text no. 12
    
13.
Lanini S, D'Arezzo S, Puro V, Martini L, Imperi F, Piselli P, et al. Molecular epidemiology of a Pseudomonas aeruginosa hospital outbreak driven by a contaminated disinfectant-soap dispenser. PLoS One 2011;6:e17064.  Back to cited text no. 13
    
14.
Droste RL. Theory and Practice of Water and Wastewater Treatment. New York: Wiley (Book); 1997.  Back to cited text no. 14
    
15.
Gupta S, Behari J, Kesari K. Low frequency ultrasonic treatment of sludge. Asian J Water Environ Pollut 2006;3:101-5.  Back to cited text no. 15
    
16.
Mayo JA, Brown CE. Effect of in-line bacteriological filters on numbers of heterotrophic bacteria in water emitted from non-autoclavable dental air-water syringes. Am J Dent 1999;12:256-60.  Back to cited text no. 16
    
17.
Santiago JI, Huntington MK, Johnston AM, Quinn RS, Williams JF. Microbial contamination of dental unit waterlines: Short- and long-term effects of flushing. Gen Dent 1994;42:528-35.  Back to cited text no. 17
    
18.
Mills SE. The dental unit waterline controversy: Defusing the myths, defining the solutions. J Am Dent Assoc 2000;131:1427-41.  Back to cited text no. 18
    
19.
Li Q, Mahendra S, Lyon DY, Brunet L, Liga MV, Li D, et al. Antimicrobial nanomaterials for water disinfection and microbial control: Potential applications and implications. Water Res 2008;42:4591-602.  Back to cited text no. 19
    
20.
Ichinose N, Ozaki Y, Kashu S. Superfine Particle Technology. 1 st ed. James M, Translator. London: Springer; 1992.  Back to cited text no. 20
    
21.
Qu X, Alvarez PJ, Li Q. Applications of nanotechnology in water and wastewater treatment. Water Res 2013;47:3931-46.  Back to cited text no. 21
    
22.
Graveland BJ, Kruif CG. Unique milk protein based nanotubes: Food and nanotechnology meet. Trends Food Sci Technol 2006;17:196-203.  Back to cited text no. 22
    
23.
Phillips KS, Han JH, Martinez M, Wang Z, Carter D, Cheng Q. Nanoscale glassification of gold substrates for surface plasmon resonance analysis of protein toxins with supported lipid membranes. Anal Chem 2006;78:596-603.  Back to cited text no. 23
    
24.
Tiwari DK, Behari J, Sen P. Application of nanoparticles in waste water treatment. World Appl Sci J 2008;3:417-33.  Back to cited text no. 24
    
25.
Siegel RW. Nanomaterials: Synthesis, properties and applications. Ann Rev Mater Sci 1991;21:559.  Back to cited text no. 25
    
26.
Siegel RW. Physics of new materials. In: Fujita FE, editor. Springer Series in Materials Science, 27. Berlin: Springer; 1994.  Back to cited text no. 26
    
27.
Boanini E, Torricelli P, Gazzano M, Giardino R, Bigi A. Nanocomposites of hydroxyapatite with aspartic acid and glutamic acid and their interaction with osteoblast-like cells. Biomaterials 2006;27:4428-33.  Back to cited text no. 27
    
28.
Aksay IA, Baer E, Sarikaya M, Tirrell DA. Hierarchically Structured Materials. Proceedings of an MRS Symposium 1992;228:1-450.  Back to cited text no. 28
    
29.
Bhainsa KC, Souza SF. Extracellular biosynthesis of silver nanoparticles using the fungus Aspergillus fumigatus. Colloids Surf B Biointerfaces 2006;47:160-4.  Back to cited text no. 29
    
30.
Bhattacharya D, Gupta RK. Nanotechnology and potential of microorganisms. Crit Rev Biotechnol 2005;25:199-204.  Back to cited text no. 30
    
31.
Bishop J. Surface Modified Drug Nanoparticles. U.S. Patent Application. Docket 61894 Filed 9/17/90; 1990.  Back to cited text no. 31
    
32.
Suslick KS, Hyeon T, Fang F. Sonochemical synthesis of iron colloids. J Am Chem Soc 1996;118:11960-1.  Back to cited text no. 32
    
33.
Patil M, Mehta DS, Guvva S. Future impact of nanotechnology on medicine and dentistry. J Indian Soc Periodontol 2008;12:34-40.  Back to cited text no. 33
[PUBMED]  Medknow Journal  
34.
Mouli CP, Kumar MS, Parthiban S. Nanotechnology in dentistry - A review. Int J Biol Med Res 2012;3:1550-3.  Back to cited text no. 34
    
35.
Kanaparthy R, Kanaparthy A. The changing face of dentistry: Nanotechnology. Int J Nanomedicine 2011;6:2799-804.  Back to cited text no. 35
    
36.
Chandra Mouli PE, Manoj Kumar S, Parthiban S. Nanotechnology in dentistry - A review. Int J Biol Med Res 2012;3:1550-3.  Back to cited text no. 36
    
37.
Mamadou SD, Savage N. Nanoparticles and water quality. J Nano Res 2005;7:325-30.  Back to cited text no. 37
    
38.
Long RQ, Yang RT. Carbon nanotubes as superior sorbent for dioxin removal. J Am Chem Soc 2001;123:2058-9.  Back to cited text no. 38
[PUBMED]    
39.
Yang K, Zhu L, Xing B. Adsorption of polycyclic aromatic hydrocarbons by carbon nanomaterials. Environ Sci Technol 2006;40:1855-61.  Back to cited text no. 39
    
40.
Yang K, Wang X, Zhu L, Xing B. Competitive sorption of pyrene, phenanthrene, and naphthalene on multiwalled carbon nanotubes. Environ Sci Technol 2006;40:5804-10.  Back to cited text no. 40
    
41.
Gotovac S, Hattori Y, Noguchi D, Miyamoto J, Kanamaru M, Utsumi S, et al. Phenanthrene adsorption from solution on single wall carbon nanotubes. J Phys Chem B 2006;110:16219-24.  Back to cited text no. 41
    
42.
Zhou QX, Xiao JP, Wang WD. Using multi-walled carbon nanotubes as solid phase extraction adsorbents to determine dichlorodiphenyltrichloroethane and its metabolites at trace level in water samples by high performance liquid chromatography with UV detection. J Chromatogr A 2006;1125:152-8.  Back to cited text no. 42
    
43.
Wang JX, Jiang DQ, Gu ZY, Yan XP. Multiwalled carbon nanotubes coated fibers for solid-phase microextraction of polybrominated diphenyl ethers in water and milk samples before gas chromatography with electron-capture detection. J Chromatogr A 2006;1137:8-14.  Back to cited text no. 43
    
44.
Peng XJ, Li YH, Luan ZK, Di ZC, Wang HY, Tian BH, et al. Adsorption of 1, 2-dichlorobenzene from water to carbon nanotubes. Chem Phys Lett 2003;376:761-6.  Back to cited text no. 44
    
45.
Cai YQ, Cai YE, Mou SF, Lu YQ. Multi-walled carbon nanotubes as a solid-phase extraction adsorbent for the determination of chlorophenols in environmental water samples. J Chromatogr A 2005;1081:245-7.  Back to cited text no. 45
    
46.
Chin CJ, Shih LC, Tsai HJ, Liu TK. Adsorption of o-xylene and p-xylene from water by SWCNTs. J Hazard Mater 2006;B138:304-10.  Back to cited text no. 46
    
47.
Lu C, Chung YL, Chang KF. Adsorption of trihalomethanes from water with carbon nanotubes. Water Res 2005;39:1183-9.  Back to cited text no. 47
    
48.
Cai Y, Jiang G, Liu J, Zhou Q. Multiwalled carbon nanotubes as a solid-phase extraction adsorbent for the determination of bisphenol A, 4-n-nonylphenol, and 4-tert-octylphenol. Anal Chem 2003;75:2517-21.  Back to cited text no. 48
    
49.
Cai YQ, Jiang QB, Liu JF, Zhou QX. Multi walled nano carbon tubules packed cartridge for the solid phase extraction of several phthalate esters from water samples and their determination by high performance liquid chromatography. Anal Chim Acta 2003;494:149-56.  Back to cited text no. 49
    
50.
Fugetsu B, Satoh S, Shiba T, Mizutani T, Lin YB, Terui N, et al. Caged multiwalled carbon nanotubes as the adsorbents for affinity-based elimination of ionic dyes. Environ Sci Technol 2004;38:6890-6.  Back to cited text no. 50
    
51.
Pan B, Xing B. Adsorption mechanisms of organic chemicals on carbon nanotubes. Environ Sci Technol 2008;42:9005-13.  Back to cited text no. 51
    
52.
Rao GP, Lu C, Su F. Sorption of divalent metal ions from aqueous solution by carbon nanotubes: A review. Sep Purif Technol 2007;58:224-31.  Back to cited text no. 52
    
53.
Koeppenkastrop D, Decarlo EH. Uptake of rare earth elements from solution by metal oxides. Environ Sci Technol 1993;27:1796-802.  Back to cited text no. 53
    
54.
Sharma YC, Srivastava V, Singh VK, Kaul SN, Weng CH. Nano-adsorbents for the removal of metallic pollutants from water and wastewater. Environ Technol 2009;30:583-609.  Back to cited text no. 54
    
55.
Crooks RM, Bradley K, Ishigami M, Zettl A. Extreme oxygen sensitivity of electronic properties of carbon nanotubes. Acc Chem Res 2001;34:181-90.  Back to cited text no. 55
    
56.
Vaseashta A, Vaclavikova M, Vaseashta S, Gallios G, Roy P, Pummakarnchana O. Nanostructures in environmental pollution detection, monitoring, and remediation. Sci Technol Adv Mater 2007;8:47-59.  Back to cited text no. 56
    
57.
Taurozzi JS, Tarabara VV. Silver nanoparticle arrays on track etch membrane support as flow-through optical sensors for water quality control. Environ Eng Sci 2007;24:122-37.  Back to cited text no. 57
    
58.
Wang J. Carbon-nanotube based electrochemical biosensors: A review. Electroanalysis 2005;17:7-14.  Back to cited text no. 58
    
59.
Trojanowicz M. Analytical applications of carbon nanotubes: A review. Trac Trends Anal Chem 2006;25:480-9.  Back to cited text no. 59
    
60.
Valcárcel M, Simonet BM, Cárdenas S, Suárez B. Present and future applications of carbon nanotubes to analytical science. Anal Bioanal Chem 2005;382:1783-90.  Back to cited text no. 60
    
61.
Merkoci A. Carbon nanotubes in analytical sciences. Microchim Acta 2006;152:157-74.  Back to cited text no. 61
    
62.
Hilal N, Zoubi HL, Darwish NA, Mohammad AW, Arabi MA. A comprehensive review of nanofiltration membranes: Treatment, pretreatment, modelling, and atomic force microscopy. Desalination 2004;170:281-308.  Back to cited text no. 62
    
63.
Srivastava A, Srivastava ON, Talapatra S, Vajtai R, Ajayan PM. Carbon nanotube filters. Nat Mater 2004;3:610-4.  Back to cited text no. 63
    
64.
Stoimenov PK, Klinger RL, Marchin GL, Klabunde KJ. Metal oxide nanoparticles as antibacterial agents. Langmuir 2002;18:6679-86.  Back to cited text no. 64
    
65.
Cho KH, Park JE, Osaka T, Park SG. The study of antimicrobial activity and preservative effects of nanosilver ingredient. Electrochim Acta 2005;51:956-60.  Back to cited text no. 65
    
66.
Jain P, Pradeep T. Potential of silver nanoparticle-coated polyurethane foam as an antibacterial water filter. Biotechnol Bioeng 2005;90:59-63.  Back to cited text no. 66
    
67.
Mpenyana-Monyatsi L, Mthombeni NH, Onyango MS, Momba MN. Cost-effective filter materials coated with silver nanoparticles for the removal of pathogenic bacteria in groundwater. Int J Environ Res Public Health 2012;9:244-71.  Back to cited text no. 67
    
68.
Mamadou SD, Savage N. Nanoparticles and water quality. J Nano Res 2005;7:325-30.  Back to cited text no. 68
    
69.
Aragon M, Kottenstette R, Dwyer B, Aragon A, Everett R, Holub W, et al. Arsenic pilot plant operation and results. Anthony, New Mexico: Sandia National Laboratories; 2007.  Back to cited text no. 69
    
70.
Lawrence MJ, Rees GD. Microemulsion-based media as novel drug delivery systems. Adv Drug Deliv Rev 2000;45:89-121.  Back to cited text no. 70
    
71.
Hamouda T, Myc A, Donovan B, Shih AY, Reuter JD, Baker JR Jr. A novel surfactant nanoemulsion with a unique non-irritant topical anti-microbial activity against bacteria enveloped viruses and fungi. Microbiol Res 2000;156:1-7.  Back to cited text no. 71
    
72.
Ramalingam K, Frohlich NC, Lee VA. Effect of nanoemulsion on dental unit waterline contamination. J Dent Sci 2013;8:333-6.  Back to cited text no. 72
    
73.
Lee VA, Karthikeyan R, Rawls HR, Amaechi BT. Anti-cariogenic effect of a cetylpyridinium chloride-containing nanoemulsion. J Dent 2010;38:742-9.  Back to cited text no. 73
    
74.
Karthikeyan R, Amaechi BT, Rawls HR, Lee VA. Antimicrobial activity of nanoemulsion on cariogenic Streptococcus mutans. Arch Oral Biol 2011;56:437-45.  Back to cited text no. 74
    
75.
Ramalingam K, Amaechi BT, Ralph RH, Lee VA. Antimicrobial activity of nanoemulsion on cariogenic planktonic and biofilm organisms. Arch Oral Biol 2012;57:15-22.  Back to cited text no. 75
    
76.
Wiesner MR, Lowry GV, Alvarez P, Dionysiou D, Biswas P. Assessing the risks of manufactured nanomaterials. Environ Sci Technol 2006;40:4336-45.  Back to cited text no. 76
    
77.
Colvin VL. The potential environmental impact of engineered nanomaterials. Nat Biotechnol 2003;21:1166-70.  Back to cited text no. 77
    
78.
Pradeep T, Anshup. Nobel metal nano particles for water purification: A critical review. Thin Solid Films 2009;517:6441-78.  Back to cited text no. 78
    
79.
Lyon DY, Brown DA, Alvarez PJ. Implications and potential applications of bactericidal fullerene water suspensions: Effect of nC(60) concentration, exposure conditions and shelf life. Water Sci Technol 2008;57:1533-8.  Back to cited text no. 79
    

Top
Correspondence Address:
Rashmi Paramashivaiah
Department of Periodontology, Krishnadevaraya College of Dental Sciences, Bengaluru, Karnataka
India
Login to access the Email id

Source of Support: None, Conflict of Interest: None


DOI: 10.4103/0970-9290.179838

Rights and Permissions


    Figures

  [Figure 1], [Figure 2], [Figure 3], [Figure 4]
 
 
    Tables

  [Table 1]



 

Top
 
 
 
  Search
 
    Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
    Email Alert *
    Add to My List *
* Registration required (free)  
 


    Abstract
    Materials and me...
    Dental unit wate...
    Applications of ...
    Individual techn...
   Conclusion
    Nanotechnology f...
    References
    Article Figures
    Article Tables

 Article Access Statistics
    Viewed2383    
    Printed51    
    Emailed0    
    PDF Downloaded179    
    Comments [Add]    

Recommend this journal