Indian Journal of Dental ResearchIndian Journal of Dental ResearchIndian Journal of Dental Research
HOME | ABOUT US | EDITORIAL BOARD | AHEAD OF PRINT | CURRENT ISSUE | ARCHIVES | INSTRUCTIONS | SUBSCRIBE | ADVERTISE | CONTACT
Indian Journal of Dental Research   Login   |  Users online: 109

Home Bookmark this page Print this page Email this page Small font sizeDefault font size Increase font size         

 


 
ORIGINAL RESEARCH Table of Contents   
Year : 2011  |  Volume : 22  |  Issue : 6  |  Page : 877-878
Oxidation heat treatment affecting metal-ceramic bonding


1 Department of Prosthodontics, Dr. Z A Dental College, Aligarh Muslim University, Aligarh, India
2 Department of Prosthodontics, ITS Dental College, Muradnagar, Ghaziabad, India

Correspondence Address:
Shraddha Rathi
Department of Prosthodontics, Dr. Z A Dental College, Aligarh Muslim University, Aligarh
India
Login to access the Email id


DOI: 10.4103/0970-9290.94664

Get Permissions

Aim of the Study: There is dearth of literature regarding the effects of oxidation heat treatment (OHT) as surface pretreatments on bond strength of base metal alloys and porcelain. Materials and Methods: Forty-five bar specimens of each two commercially available base metal alloys Mealloy and Wirorn-99 (were fabricated. Dimensions of each specimen were 15.0 × 2.0 × 0.5 mm (according to the ISO 6872-1984). According to the surface pretreatments the samples of the two groups were categorized into three subgroups: With OHT only, with sandblasting only (with Al 2 O 3 of 110 μm) and with OHT and sandblasting. Application of commercially available Duceram porcelain in thickness of 2.00 mm was applied over the surface of metal with the pretreatments. Samples were then placed under SEM for EDX examination to evaluate ionic changes that occurred at the metal-ceramic interface. Flexural bond strength of each sample was calculated under Universal Testing Machine. Results: The one-way ANOVA indicated no significant influence of either metal type (P=0.811) or any surface pretreatment (P=0.757) on the metal-ceramic bond strength. Conclusion: OHT resulted in the increase in amount of oxides at the metal-ceramic interface. However, neither metal type nor surface pretreatments affected bond strength.


[FULL TEXT] [PDF]*
Print this article     Email this article

 
 Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
  Citation Manager
 Access Statistics
  Reader Comments
  Email Alert *
  Add to My List *
 
 

 Article Access Statistics
    Viewed1348    
    Printed68    
    Emailed2    
    PDF Downloaded72    
    Comments [Add]    

Recommend this journal